Pierre Pierre, who replica handbag 185cm tall, gucci replica handbags the "Diamond King" in his hermes replica handbags . He has been selected as one of the handbag replica most beautiful 50 people in the "People" magazine. It is also known as replica handbags most elegant and quiet in the world. Unforgettable prince.

1SD536F2-5SNA2400E170100

Gate Peak Current Iout -36 to 36 A
Max. Output Power DC/DC Converter 5 W
Max. DC-Link Voltage 1200 V
Max. Operating Voltage 1700 V
Supply Voltage VDC1 0 to 16 V
Max. Average Supply Current IDC 500 mA
Max. Switching Frequency F 7.5 kHz
Max. Test Voltage at 50 Hz/1 min2 4000 VAC(eff)
Operating Temperature -40 to 85 ºC
Storage Temperature -40 to 90 ºC
Nominal Supply Voltage VDC 1 14.5 to 15.5 (typ. 15) V
Supply Current IDC 2 Opt. 1: 125 mA Standard: 120 mA
Efficiency ?3 85 %
Turn-On Threshold Vth 13 V
Hysteresis On/Off 0.6 V
Coupling Capacitance Cio4 15 pF
Vce – Monitoring Threshold1 50 to 60 V
Response Time – 3-Level Mode typ. 8.5 to 9 µs
Response Time – 2-Level Mode typ. 9.5 to 10 µs
Blocking Time – 2-Level Mode 1 s
Turn-Off Delay tpd(on) 350 ns
Turn-Off Delay tpd(off) 450 ns
Output Rise Time tr(out) 15 ns
Output Fall Time tf(out) 20 ns
Acknowledge Delay Time1 380 ns
Acknowledge Pulse Width2 0.6 to 1.8 µs
Turn-On Gate Resistor Rgon 0.56 O
Turn-Off Gate Resistor Rgoff 1.7 O
Min. Partial Discharge Extinction Voltage2 1400 VAC(eff)
Min. Creepage Distance3 21 mm
Mechanical and Electrical Interfaces Dimensions 193 x 50 mm
Interface Drive signal input (Opt. 01) – Fiber-optic receiver, HFBR-2522 Drive signal input (Standard) – Fiber-optic receiver, HFBR-2412T Power supply connector – On-board connector, 77315-101-05 Status output (Opt. 01) – Fiber-optic transmitter, HFBR-1412T Status output (Standard) – Fiber-optic transmitter, HFBR-1522
Power Supply Connector Ground GND – Pin numbers 1, 2, 4, 5 Supply voltage VDC – Pin numbers 3
Electrical Characteristics Power Supply (All data refer to +25 °C and VDC = 15 V unless otherwise specified)
Absolute Maximum Ratings VDC to GND Primary to output
Short-Circuit Protection between aux. terminals
Timing Characteristics at status output
Product Highlights Protects the IGBT from short-circuit failure Active clamping of Vce at turn-off Extremely reliable long service life No electrolytic capacitors Gate current up to ±36 A Electrical insulation 4000 VAC Fiber-optic links Monitoring of supply voltage and fiber optics Switching frequency DC to max. 7.5 kHz Duty cycle 0... 100 % Built-in DC/DC power supply Shortens application development time
Applications Three/multi-level converters Two-level converters Medium-voltage converters High-voltage applications Industrial drives Traction Railroad power supplies Wind-power converters Radiology and laser technology Research Almost all other conceivable applications
Important Notes This data sheet contains only product-specific data. For a detailed description, must- read application notes and common data that apply to the whole series, please refer to the "Description and Application Manual for 1SD210F2 SCALE High-Voltage IGBT Drivers".When applying SCALE plug-and-play drivers, please note that these drivers are specifically adapted to a particular type of IGBT module. Therefore, the type designation of SCALE plug-and-play drivers also includes the type designation of t
Electrical Insulation 1 Continuous or repeated 2 IEC1287 / < 10 pC 3 Primary to output
  • Ultra-compact, high-performance driver for 2-level, 3-level and multilevel converters
  • The SCALE plug-and-play driver 1SD536F2-5SNA2400E170100 is an ultra- compact single-channel intelligent gate driver designed for ABB's high-power IGBTs of type 5SNA2400E170100. The driver features a fiber-optic interface, a built-in DC/DC power supply and a selectable operating mode via a jumper.
  • Mounting Principle: Direct screw mount on IGBT.