Pierre Pierre, who replica handbag 185cm tall, gucci replica handbags the "Diamond King" in his hermes replica handbags . He has been selected as one of the handbag replica most beautiful 50 people in the "People" magazine. It is also known as replica handbags most elegant and quiet in the world. Unforgettable prince.


Calibrated Yes
Nominal Primary Voltage (Vpn) 2000 V
Measuring Range (Peak) ±3000 V
Secondary Current at Vpn (mA) 50 mA
Supply Voltage (DC) ±12 to ±24 V
Product Type Voltage Sensors
Min. Measuring Resistance at ±15 V 0 O
Primary Turn Number 20000
Secondary Turn Number 2000
Accuracy at UPN = ±1 %
Offset Current = ±0.3 mA
Linearity = ±0.1 %
Thermal Drift Coefficient (-25 to 70°C) = ±5 µA/ºC
Delay Time = 100 µs
Max. No-Load Consumption Current at ± 12 V 15 mA
Max. No-Load Consumption Current at ± 24 V 25 mA
Primary Resistance 400 kO
Secondary Resistance 60 O
Dielectric Strength Primary/(Secondary-Screen-Ground) 12 kV
Dielectric Strength Secondary/(Screen-Ground) 1 kV
Voltage Drop = 1.5 V
Mass 0.550 kg
Operating Temperature -25 to +70 ºC
Storage Temperature -40 to +85 ºC
Primary Connection 2 x M5 studs
Secondary Connection 5 x M5 studs
Ordering Code EM010-9318
Mounting Type Closed Loop Hall Effect Technology
Features General DataPlastic case and insulating resin are self-extinguishing.Direction of the current: A positive primary differential voltage UHT+ - UHT- > 0) results in a positive secondary output current from terminal M.The internal electrostatic screen between the primary and secondary is linked to the terminal «E».The heatsink for the integrated input resistance RE is connected to the marked earth terminal on the sensor.Protection of the power supply against polarity reversal.Burn-in t
  • Closed loop Hall effect technology also allows for voltage measurement.
  • For calibrated EM010 sensors, the voltage to be measured is applied directly to the primary terminals of the sensor.
  • On the other hand, for not calibrated EM010 sensors, an external input resistor must be inserted in the primary before connecting the voltage to be measured.