These sensors are designed for PCB mounting. The sensor is mechanically fixed by soldering the secondary circuit pins to the PCB. The primary connection can also be integrated in the sensor (pins for MP sensors, integrated primary bar for EL BB sensors).The primary conductor for EL sensors can also be a cable or a bar.
Hall Effect Closed Loop
Utilisation
Sensors to measure d.c., a.c. or pulsating currents with a galvanic insulation between primary and secondary circuits.
Type MP25P1 : the rating (from 5 to 25 A) is determined via a combination of the primary connections.
These sensors are designed for PCB mounting. The sensor is mechanically fixed by soldering the secondary circuit pins to the PCB. The primary connection can also be integrated in the sensor (pins for MP sensors, integrated primary bar for EL BB sensors).The primary conductor for EL sensors can also be a cable or a bar.
Hall Effect Closed Loop
Utilisation
Sensors to measure d.c., a.c. or pulsating currents with a galvanic insulation between primary and secondary circuits.
Type MP25P1 : the rating (from 5 to 25 A) is determined via a combination of the primary connections.
These sensors are designed for PCB mounting. The sensor is mechanically fixed by soldering the secondary circuit pins to the PCB. The primary connection can also be integrated in the sensor (pins for MP sensors, integrated primary bar for EL BB sensors).The primary conductor for EL sensors can also be a cable or a bar.
Hall Effect Closed Loop
Utilisation
Sensors to measure d.c., a.c. or pulsating currents with a galvanic insulation between primary and secondary circuits.
Type MP25P1 : the rating (from 5 to 25 A) is determined via a combination of the primary connections.
These sensors are designed for PCB mounting. The sensor is mechanically fixed by soldering the secondary circuit pins to the PCB. The primary connection can also be integrated in the sensor (pins for MP sensors, integrated primary bar for EL BB sensors).The primary conductor for EL sensors can also be a cable or a bar.
Hall Effect Closed Loop
Utilisation
Sensors to measure d.c., a.c. or pulsating currents with a galvanic insulation between primary and secondary circuits.
Type MP25P1 : the rating (from 5 to 25 A) is determined via a combination of the primary connections.